Z_case_Generator_V2.0/AssemblyTemplateManager.py

@@ -315,7 +315,7 @@ class AssemblyTemplateManager:
             if inner_sync:
                 self.write_register(addr_base['SYST_BASE']+reg_define['sys_reg']['SYNCR'], 3<<16 | 1)
                 self.mk.rw_once('r', addr_base['SYST_BASE']+reg_define['pll_reg']['INTPLL_CLKRXPD'], [0]*20, self.config_file)
-            #    self.mk.rw_once('r', addr_base['DBGM_BASE'], [0]*2048, self.config_file)
+                self.mk.rw_once('r', addr_base['DBGM_BASE'], [0]*2048, self.config_file)
 
 def instruction_config(mk_instance, mk_instr, **kwargs):
     asm_templates = AssemblyTemplateManager(mk_instance, mk_instr, **kwargs)

Z_case_Generator_V2.0/ZChipConfig.py

@@ -251,8 +251,6 @@ class ZChipConfig(object):
                 self._ramp_config(**kwargs)
             elif chip_mode == 'AWG':
                 self._awg_config(**kwargs)
-
-
     def _ramp_config(self, **kwargs):
         self.write_register(addr_base['CTRL0_BASE'] + reg_define['ctrl_reg']['MODDOTR'], 8)  # 切换到RAMP输出
         ramp_ctrl = kwargs.pop('ramp_ctrl')

Z_case_Generator_V2.0/gen_cases/General/TC_AWG_MOD_TAILCOR.json

@@ -27,7 +27,7 @@
   "rz_ff_pha": 0,
   "rz_fm_pha": 45,
   "ff_amp": [
-    10000,
+    32767,
     32767,
     32767,
     32767
@@ -122,21 +122,6 @@
       "wave_time": 22
     }
   ],
-  "custom_registers": [
-    {
-      "addr": 52,
-      "values": 5
-    },
-    {
-      "addr": 6291504,
-      "values": [
-        0,
-        0,
-        0,
-        0
-      ]
-    }
-  ],
   "FolderName": "gen_cases\\General",
   "CaseName": "TC_AWG_MOD_TAILCOR",
   "config_file": "gen_cases\\General\\TC_AWG_MOD_TAILCOR_HEX.txt"

Z_case_Generator_V2.0/gen_cases/General/TC_AWG_MOD_TAILCOR_HEX.txt

@@ -1,14 +1,3 @@
-00000034
-00100004
-00000005
-
-00600030
-00100010
-00000000
-00000000
-00000000
-00000000
-
 00301000
 00100080
 0347a17d
@@ -100,7 +89,7 @@
 6aaa0000
 7fff0000
 00000000
-27107fff
+7fff7fff
 7fff7fff
 7fff7fff
 7fff7fff

Z_case_Generator_V2.0/z_case_gen.ipynb

@@ -2,7 +2,7 @@
  "cells": [
   {
    "cell_type": "code",
-   "execution_count": 3,
+   "execution_count": 7,
    "id": "initial_id",
    "metadata": {
     "ExecuteTime": {
@@ -11,7 +11,16 @@
     },
     "collapsed": true
    },
-   "outputs": [],
+   "outputs": [
+    {
+     "name": "stdout",
+     "output_type": "stream",
+     "text": [
+      "The autoreload extension is already loaded. To reload it, use:\n",
+      "  %reload_ext autoreload\n"
+     ]
+    }
+   ],
    "source": [
     "# _配置\n",
     "# TODO: 完整的定向case测试集\n",
@@ -136,7 +145,7 @@
   },
   {
    "cell_type": "code",
-   "execution_count": 2,
+   "execution_count": 3,
    "id": "dd0c2d05a0afc9b6",
    "metadata": {
     "ExecuteTime": {
@@ -146,14 +155,15 @@
    },
    "outputs": [
     {
-     "ename": "NameError",
+     "ename": "FileNotFoundError",
-     "evalue": "name 'Path' is not defined",
+     "evalue": "[Errno 2] No such file or directory: 'D:\\\\MyDocument\\\\工作\\\\Z芯片的case生成器\\\\Chip_Case_Generator\\\\Z_case_Generator_V2.0\\\\gen_cases\\\\TC_FFNCO_FREQ_SCAN\\\\tc_ffnco_freq_scan100Mhz.json'",
      "output_type": "error",
      "traceback": [
       "\u001b[1;31m---------------------------------------------------------------------------\u001b[0m",
-      "\u001b[1;31mNameError\u001b[0m                                 Traceback (most recent call last)",
+      "\u001b[1;31mFileNotFoundError\u001b[0m                         Traceback (most recent call last)",
-      "Input \u001b[1;32mIn [2]\u001b[0m, in \u001b[0;36m<cell line: 0>\u001b[1;34m()\u001b[0m\n\u001b[0;32m      1\u001b[0m \u001b[38;5;66;03m# load params\u001b[39;00m\n\u001b[0;32m      2\u001b[0m \u001b[38;5;66;03m# 1. 指定要加载的 JSON 文件完整路径\u001b[39;00m\n\u001b[0;32m      3\u001b[0m json_file_path \u001b[38;5;241m=\u001b[39m \u001b[38;5;124mr\u001b[39m\u001b[38;5;124m'\u001b[39m\u001b[38;5;124mD:\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mMyDocument\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124m工作\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mZ芯片的case生成器\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mChip_Case_Generator\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mZ_case_Generator_V2.0\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mgen_cases\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mTC_FFNCO_FREQ_SCAN\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mtc_ffnco_freq_scan100Mhz.json\u001b[39m\u001b[38;5;124m'\u001b[39m\n\u001b[1;32m----> 5\u001b[0m json_path \u001b[38;5;241m=\u001b[39m \u001b[43mPath\u001b[49m(json_file_path)\n\u001b[0;32m      6\u001b[0m load_dir \u001b[38;5;241m=\u001b[39m json_path\u001b[38;5;241m.\u001b[39mparent       \u001b[38;5;66;03m# 获取目录\u001b[39;00m\n\u001b[0;32m      7\u001b[0m case_name \u001b[38;5;241m=\u001b[39m json_path\u001b[38;5;241m.\u001b[39mstem        \u001b[38;5;66;03m# 文件名跟随.json前面的\u001b[39;00m\n",
+      "Input \u001b[1;32mIn [3]\u001b[0m, in \u001b[0;36m<cell line: 0>\u001b[1;34m()\u001b[0m\n\u001b[0;32m      9\u001b[0m \u001b[38;5;66;03m# 2. 加载配置\u001b[39;00m\n\u001b[0;32m     10\u001b[0m pm_load \u001b[38;5;241m=\u001b[39m ParamsManager(load_dir)\n\u001b[1;32m---> 11\u001b[0m params \u001b[38;5;241m=\u001b[39m \u001b[43mpm_load\u001b[49m\u001b[38;5;241;43m.\u001b[39;49m\u001b[43mload\u001b[49m\u001b[43m(\u001b[49m\u001b[43mcase_name\u001b[49m\u001b[43m)\u001b[49m\n\u001b[0;32m     13\u001b[0m \u001b[38;5;66;03m# 3. 自定义你的新输出路径 \u001b[39;00m\n\u001b[0;32m     14\u001b[0m custom_output_dir \u001b[38;5;241m=\u001b[39m \u001b[38;5;124mr\u001b[39m\u001b[38;5;124m'\u001b[39m\u001b[38;5;124mD:\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mMyDocument\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124m工作\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mZ芯片的case生成器\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mChip_Case_Generator\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mZ_case_Generator_V2.0\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mgen_cases\u001b[39m\u001b[38;5;124m\\\u001b[39m\u001b[38;5;124mTC_FFNCO_FREQ_SCAN\u001b[39m\u001b[38;5;124m'\u001b[39m\n",
-      "\u001b[1;31mNameError\u001b[0m: name 'Path' is not defined"
+      "File \u001b[1;32md:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\ParamsManager.py:30\u001b[0m, in \u001b[0;36mParamsManager.load\u001b[1;34m(self, filename)\u001b[0m\n\u001b[0;32m     26\u001b[0m     filename \u001b[38;5;241m=\u001b[39m filename \u001b[38;5;241m+\u001b[39m \u001b[38;5;124m'\u001b[39m\u001b[38;5;124m.json\u001b[39m\u001b[38;5;124m'\u001b[39m\n\u001b[0;32m     28\u001b[0m filepath \u001b[38;5;241m=\u001b[39m os\u001b[38;5;241m.\u001b[39mpath\u001b[38;5;241m.\u001b[39mjoin(\u001b[38;5;28mself\u001b[39m\u001b[38;5;241m.\u001b[39mparams_dir, filename)\n\u001b[1;32m---> 30\u001b[0m \u001b[38;5;28;01mwith\u001b[39;00m \u001b[38;5;28;43mopen\u001b[39;49m\u001b[43m(\u001b[49m\u001b[43mfilepath\u001b[49m\u001b[43m,\u001b[49m\u001b[43m \u001b[49m\u001b[38;5;124;43m'\u001b[39;49m\u001b[38;5;124;43mr\u001b[39;49m\u001b[38;5;124;43m'\u001b[39;49m\u001b[43m,\u001b[49m\u001b[43m \u001b[49m\u001b[43mencoding\u001b[49m\u001b[38;5;241;43m=\u001b[39;49m\u001b[38;5;124;43m'\u001b[39;49m\u001b[38;5;124;43mutf-8\u001b[39;49m\u001b[38;5;124;43m'\u001b[39;49m\u001b[43m)\u001b[49m \u001b[38;5;28;01mas\u001b[39;00m f:\n\u001b[0;32m     31\u001b[0m     params \u001b[38;5;241m=\u001b[39m json\u001b[38;5;241m.\u001b[39mload(f)\n\u001b[0;32m     32\u001b[0m \u001b[38;5;28;01mreturn\u001b[39;00m params\n",
+      "\u001b[1;31mFileNotFoundError\u001b[0m: [Errno 2] No such file or directory: 'D:\\\\MyDocument\\\\工作\\\\Z芯片的case生成器\\\\Chip_Case_Generator\\\\Z_case_Generator_V2.0\\\\gen_cases\\\\TC_FFNCO_FREQ_SCAN\\\\tc_ffnco_freq_scan100Mhz.json'"
      ]
     }
    ],
@@ -179,7 +189,7 @@
   },
   {
    "cell_type": "code",
-   "execution_count": 14,
+   "execution_count": null,
    "id": "47c22172d77fc331",
    "metadata": {
     "ExecuteTime": {
@@ -195,13 +205,13 @@
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\General\\TC_AWG_MOD_TAILCOR_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\General\\tc_general_awg_HEX.txt\n"
      ]
     },
     {
      "data": {
       "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\General\\TC_AWG_MOD_TAILCOR_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\General\\TC_AWG_MOD_TAILCOR_HEX.txt</a>"
+       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\General\\tc_general_awg_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\General\\tc_general_awg_HEX.txt</a>"
       ],
       "text/plain": [
        "<IPython.core.display.HTML object>"
@@ -217,19 +227,19 @@
     "run_case({\n",
     "    'chip_mode':'AWG',  #分为AWG和RAMP模式\n",
     "    'mode':'mod',             #可选nco nco_fm env mod四种模式\n",
-    "    'tail_en': True,               #拖尾矫正开关\n",
+    "    'tail_en': False,               #拖尾矫正开关\n",
     "    'tc_coef_set': 'coef1',       #拖尾矫正打开生效\n",
     "    'inner_sync': True,              #内部触发，应该是软触发，写一个寄存器，就能触发\n",
     "    'amp_mod_enable': True,         #调幅的开关，mod调制模式下起作用。\n",
     "    'freq_mod_enable': True,        #nco的开关\n",
     "    'bias_enable': True,            #必开的开关，AWG模式下，偏置必须打开，否则AWG输出保持为0.\n",
     "    \n",
-    "    'fcw': [200, 200, 300, 400],  # MHz\n",
+    "    'fcw': [100, 200, 300, 400],  # MHz\n",
-    "    'mcu_reg_clr': False,\n",
+    "    'mcu_reg_clr': True,\n",
     "    'pcw': [0, 30, 45, 90, 120, 135, 150, 180],  # Deg   \n",
     "    'rz_ff_pha': 0,\n",
     "    'rz_fm_pha': 45,\n",
-    "    'ff_amp': [10000, 32767, 32767, 32767],\n",
+    "    'ff_amp': [32767, 32767, 32767, 32767],\n",
     "    'fm_amp': [32767, 32767, 32767, 32767],\n",
     "    'bias': [1, 2, 3, 4],\n",
     "    'fm_en' :False,                                   #nco_fm的开关，在nco_fm模式时，必须打开,不然nco_fm不工作，就是一条直线.  mod的模式下开启fm_en,同时打开nco，就能看到两个正弦波叠加啊   \n",
@@ -237,13 +247,13 @@
     "    'send_interval': [100, 150, 200, 250, 300, 350, 400,450,500],\n",
     "    'cycle_num': 0,                  #0代表无限循环，如果要想扫参，那么这个波形序列就不能无限循环播放\n",
     "    'codeword_configs': [\n",
-    "        # {'wave_hold': 1, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 0},\n",
+    "        {'wave_hold': 1, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 0},\n",
-    "        # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 0, 'env_index': 1},\n",
+    "        {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 0, 'env_index': 1},\n",
-    "        {'wave_hold': 1, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 2},\n",
+    "        # {'wave_hold': 1, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 2},\n",
-    "        {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 0, 'env_index': 3},\n",
+    "        # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 0, 'env_index': 3},\n",
     "        # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 4},\n",
     "        # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 5},\n",
-    "        #{'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 6},\n",
+    "        # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 6},\n",
     "        # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 7},\n",
     "        # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 8},\n",
     "    ],\n",
@@ -261,13 +271,8 @@
     "        {'envelope_type': 'rect', 'amp': 32767, 'wave_time': 12},\n",
     "        {'envelope_type': 'flattop', 'amp': 32767, 'edge_time': 2, 'wave_time': 22},\n",
     "    ],\n",
-    "\n",
-    "    'custom_registers': [\n",
-    "        {\"addr\": 0x34, \"values\": 0x5}, # Debug存储器使能\n",
-    "        {\"addr\": 0x600030, \"values\": [0x0, 0x0, 0x0, 0x0]},  # DAC 配置\n",
-    "    ],\n",
     "    'FolderName': 'General',\n",
-    "    'CaseName': 'TC_AWG_MOD_TAILCOR',\n",
+    "    'CaseName': 'tc_general_awg',\n",
     "})"
    ]
   },
@@ -343,7 +348,7 @@
   },
   {
    "cell_type": "code",
-   "execution_count": 7,
+   "execution_count": 17,
    "id": "3895007623de81e8",
    "metadata": {
     "ExecuteTime": {
@@ -359,225 +364,63 @@
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_1MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_0deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_1MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_1MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_101MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_15deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_101MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_101MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_201MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_30deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_201MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_201MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_301MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_45deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_301MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_301MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_401MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_60deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_401MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_401MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_501MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_75deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_501MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_501MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_601MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_90deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_601MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_601MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_701MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_105deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_701MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_701MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_801MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_120deg_HEX.txt\n",
-     ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_801MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_801MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
-    },
-    {
-     "name": "stdout",
-     "output_type": "stream",
-     "text": [
       "执行 config_chip_reg\n",
       "执行了 env_config\n",
       "执行了 instruction_config\n",
-      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_901MHz_HEX.txt\n"
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_135deg_HEX.txt\n",
+      "执行 config_chip_reg\n",
+      "执行了 env_config\n",
+      "执行了 instruction_config\n",
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_150deg_HEX.txt\n",
+      "执行 config_chip_reg\n",
+      "执行了 env_config\n",
+      "执行了 instruction_config\n",
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_165deg_HEX.txt\n",
+      "执行 config_chip_reg\n",
+      "执行了 env_config\n",
+      "执行了 instruction_config\n",
+      "生成文件路径：D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_FFNCO_PHA_SCAN\\tc_ffnco_pha_scan_180deg_HEX.txt\n"
      ]
-    },
-    {
-     "data": {
-      "text/html": [
-       "<a href=\"D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_901MHz_HEX.txt\" target=\"_blank\">D:\\MyDocument\\工作\\Z芯片的case生成器\\Chip_Case_Generator\\Z_case_Generator_V2.0\\gen_cases\\TC_AWG_NCO_FM_FREQ\\tc_awg_nco_fm_freq_901MHz_HEX.txt</a>"
-      ],
-      "text/plain": [
-       "<IPython.core.display.HTML object>"
-      ]
-     },
-     "metadata": {},
-     "output_type": "display_data"
     }
    ],
    "source": [
     "# ========== 扫频参数配置（你只需要改这里） ==========\n",
-    "var_start = 1      # 起始频率 (MHz)\n",
+    "var_start = 0      # 起始频率 (MHz)\n",
-    "var_stop = 901       # 终止频率 (MHz)\n",
+    "var_stop = 180       # 终止频率 (MHz)\n",
-    "var_step = 100        # 步进 (MHz)\n",
+    "var_step = 15        # 步进 (MHz)\n",
     "# ===================================================\n",
     "\n",
     "# 生成频率列表\n",
@@ -588,7 +431,7 @@
     "for var in var_list:\n",
     "    run_case({\n",
     "        'chip_mode': 'AWG',\n",
-    "        'mode': 'nco_fm',\n",
+    "        'mode': 'nco',\n",
     "        'tail_en': False,\n",
     "        'tc_coef_set': 'coef1',\n",
     "        'inner_sync': True,\n",
@@ -596,24 +439,24 @@
     "        'freq_mod_enable': True,\n",
     "        'bias_enable': True,\n",
     "        \n",
-    "        'fcw': [var, 200, 300, 400],  # 只有第一个元素在变\n",
+    "        'fcw': [100, 200, 300, 400],  # 只有第一个元素在变\n",
     "        'mcu_reg_clr': True,\n",
-    "        'pcw': [15, 30, 45, 90, 120, 135, 150, 180],\n",
+    "        'pcw': [var, 30, 45, 90, 120, 135, 150, 180],\n",
     "        'rz_ff_pha': 0,\n",
     "        'rz_fm_pha': 45,\n",
     "        'ff_amp': [32767, 32767, 32767, 32767],\n",
     "        'fm_amp': [32767, 32767, 32767, 32767],\n",
     "        'bias': [1, 2, 3, 4],\n",
-    "        'fm_en': True,\n",
+    "        'fm_en': False,\n",
     "        'instr_type': 'general_send_wait',\n",
     "        'send_interval': [100, 150, 200, 250, 300, 350, 400, 450, 500],\n",
     "        'cycle_num': 1,\n",
     "        'codeword_configs': [\n",
     "            {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 4},\n",
-    "            # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 5},\n",
+    "            {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 5},\n",
-    "            # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 6},\n",
+    "            {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 6},\n",
-    "            # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 7},\n",
+    "            {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 7},\n",
-    "            # {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 8},\n",
+    "            {'wave_hold': 0, 'fcw_index': 0, 'pcw_index': 0, 'code_clr': 1, 'env_index': 8},\n",
     "        ],\n",
     "        'sweep_config': {\n",
     "            'sweep_num': 0,\n",
@@ -629,8 +472,8 @@
     "            {'envelope_type': 'rect', 'amp': 32767, 'wave_time': 12},\n",
     "            {'envelope_type': 'flattop', 'amp': 32767, 'edge_time': 2, 'wave_time': 22},\n",
     "        ],\n",
-    "        'FolderName': 'TC_AWG_NCO_FM_FREQ',\n",
+    "        'FolderName': 'TC_FFNCO_PHA_SCAN',\n",
-    "        'CaseName': f'tc_awg_nco_fm_freq_{var}MHz',  # 自动生成文件名\n",
+    "        'CaseName': f'tc_ffnco_pha_scan_{var}deg',  # 自动生成文件名\n",
     "    })"
    ]
   }